6772FordFseries
Head Administrator
Global user
Registered: 11-2003
Location: West Point, NE
Posts: 1390
|
|
Reply | Quote
|
|
Re: This aircompressor adaquate?
Evan: I had my father-in-law take a look at this thread to offer some input. He just retired after spending MANY years with the local electric company and is the guy I turn to for all my related questions. Here's his input (Thanks, Earl!):
"First of all - there are things that Evan CAN do and things that are actually legal or recommended by the National Electrical Code. Many states & cities have laws regarding who and what can be done when wiring and many require electrical permits and inspections. Evan should first check to see what the local codes allow.
My first recommendation - hire or consult with a local electrician.
Now on to what CAN be done...
Yes, the air compressor can be tied to the same breaker (30 amp-2 pole) as the dryer if the A/C has the same electrical requirements. How far away is the A/C from the dryer? Make sure that the correct wire size is used to compensate for voltage drop. How does Evan plan on connecting to the existing dryer circuit? The use of a 2-pole 240V double throw switch (non-fused) at the dryer location would make sure that only one (dryer OR A/C) can be used at the same time. Make sure the correct wire type is used from there to the A/C fuse box."
Hope this helps.
---
Keith
FORDification Forum Administrator
1967 Ford F-100 2WD shortbox
admin@fordification.com
|
|
7/3/2004, 11:36 am
|
Send Email to 6772FordFseries
Send PM to 6772FordFseries
AIM
Yahoo
Blog
|
evanpdavis
New Member
Global user
Registered: 07-2004
Posts: 6
|
|
Reply | Quote
|
|
Re: This aircompressor adaquate?
Hi Keith,
Thanks a bunch for that information. The dryer is on the same size of circuit needed for the compressor (30amp). The dryer has the correct wire size. I was going to install a box and send out two different lines from that box, one to the dryer, one to the compressor. The distance might be 30ft.
BTW, I can legally work on electrical on my own home, just permits are required. However, anyone outside of the house or a direct relative (i.e. brother) must be a licensed electrician. Of course, inspectors still don't like non-licensed folks to do the work but oh well.
Thanks again for the help!
Evan
|
|
7/3/2004, 12:11 pm
|
Send Email to evanpdavis
Send PM to evanpdavis
|
